General DescriptionThese breakout boards bring all 26 pins plus shield of a DB26HD (high density) connector out to screw terminal blocks for easy connection and prototyping work. These breakout boards are perfect for field wiring tasks and are available in two different connector hardware options: captive screws and jack screws. The captive screws accommodate direct mounting to a mating connector which contains jack screws, while the jack screw option is perfect for mounting to a wall box plate or thin panel that has a DB26HD cutout.
The small footprint means that the end profile of the breakout board is no larger than the connector itself. This can be important when accessing multiple connectors which are spaced closely together. The breakout board also includes provision for strain reliefs; holes drilled in the board provide anchor points where tie-wraps can be attached.
For larger DB26HD breakout boards that include a prototyping area, mounting holes, and DIN rail mounting options, please click here.
These break out boards are perfect for experimentation and prototype work, as well as for use in the educational laboratory. They are well-suited for interfacing with data acquisition equipment or any other devices that use a DB-26HD connector. A breakout board is sometimes referred to as a "transition module", "terminal board", or "interface module".
Connector Hardware OptionsThese breakout boards are available with either jack screws or captive screws for the connector hardware. The jack screws work well when mounting the breakout board to a wall box plate or thin panel that has a DB26HD cutout; the captive screws allow a firm connection between the breakout board and a connector that already has jack screws. Both options are pictured below:
Pricing and Ordering
All of the above items are normally stocked. Please call us if you need to verify availability for a specific quantity, or for pricing at higher quantities. Please visit our ordering page for our ordering policies and a list of ordering methods.
|© 2013 Winford Engineering, LLC; 4169 Four Mile Road; Bay City, Michigan 48706; USA|